Quick Answer: The Aiper Scuba N1 Plus is a cordless robotic pool cleaner covering inground pools up to 1,600 sq ft, running 180 minutes (3 hours) per charge on an 80 GPM (4,800 GPH) brushless motor, with confirmed wall-climbing up to 105 degrees. It sells for roughly $569.99-$599.99 (Aiper’s own store lists $589.97, Pool Nation USA $599.99, list price $699.99). The real catch: that suction rating is identical to the cheaper base Scuba N1 — the N1 Plus’s extra $90-220 buys app control, a longer runtime, and confirmed wall-climbing, not more cleaning power, and it now overlaps heavily with Aiper’s own better-proven Scuba S1.
Aiper’s Scuba lineup already ran seven tiers deep before the N1 Plus arrived, and this one slots in as a quiet mid-cycle addition rather than a headline launch — it shows up on Home Depot, Lowe’s, and Aiper’s own store, but with far less independent review coverage than the N1, N1 Pro, or S1 it sits between. Here’s what’s actually confirmed, what genuinely changed from the base N1, and whether it’s worth choosing over the Scuba S1 you might already be considering.
Aiper Scuba N1 Plus at a glance
| Spec | Aiper Scuba N1 Plus (2026) |
|---|---|
| Type | Cordless robotic pool cleaner |
| Cleans | Floor, walls (confirmed to 105°), waterline |
| Coverage | Inground pools up to 1,600 sq ft, 50 ft length |
| Suction | 80 GPM (300 LPM) / 4,800 GPH, brushless motor |
| Runtime | Up to 180 minutes per full charge |
| Recharge | 3-4 hours |
| Mobility | Caterpillar treads, WavePath navigation |
| Modes | 4: Floor, Wall, Auto, Eco (periodic) |
| Filtration | 180-micron basket standard; 3-micron MicroMesh option |
| App control | Yes, Aiper app with OTA updates (N1 has none) |
| Weight | 17.4 lbs (7.9 kg) |
| Warranty | 2 years main unit, 6 months charger |
| Price | $569.99-$599.99 sale / $699.99 list |
Aiper Scuba N1 Plus
- 80 GPM (4,800 GPH) brushless motor with caterpillar treads for wall climbing to 105°.
- Covers inground pools up to 1,600 sq ft, 50 ft in length.
- Up to 180 minutes per charge, roughly 3-4 hours to recharge.
- App control with OTA updates and an optional 3-micron MicroMesh filter.
Get your pool robot cleaning by the weekend — try Amazon Prime free for 30 days and skip the wait on a bulky box like this one.
By the numbers
- Suction is unchanged from the base N1: Aiper’s own spec sheet lists 80 GPM (4,800 GPH) for the N1 Plus — the exact figure published for the cheaper Scuba N1’s brushless motor. The upgrade doesn’t come from more cleaning power.
- Runtime: Up to 180 minutes per charge, 30 minutes longer than the base N1’s 150-minute rating, per Aiper’s own product page.
- Wall-climbing angle: rated to 105 degrees, a concrete spec the base N1’s own listings and independent reviewers never agree on.
- Price spread: $589.97 on Aiper’s own authorized-dealer store, $599.99 at Pool Nation USA, and $699.99 list at Lowe’s with a $130.00 available discount — a tighter, more consistent spread than the base N1’s roughly 25% retailer gap.
What it does well
Settles the N1’s wall-climbing ambiguity. The base Scuba N1’s own review on this site flags genuinely conflicting sources on whether it climbs walls at all. The N1 Plus removes that doubt with a published 105-degree rating and a dedicated Wall mode.
Longer runtime than the base N1. 180 minutes versus 150 minutes is a real, useful upgrade for larger or more debris-heavy 1,600 sq ft pools that need a full single-session clean.
App control with OTA updates. The base N1 has no app connectivity at all; the N1 Plus adds scheduling and monitoring through the Aiper app, plus over-the-air firmware updates Aiper can push without a hardware swap.
MicroMesh filter option. The optional 3-micron Replaceable MicroMesh Ultra-fine Filter — the same micron rating as the Scuba S1’s dual-filter system — catches finer debris than the standard 180-micron basket when you need it.
Where it falls short
- No suction upgrade, despite the higher price. Paying $90-220 more than the base N1 for identical 4,800 GPH suction is easy to miss unless you compare spec sheets directly — the marketing emphasis on “Plus” doesn’t extend to cleaning power.
- Thin independent review coverage. Unlike the N1, N1 Pro, and S1 — each covered by outlets like RoboticReviews — we found no completed third-party lab test of the N1 Plus at publish time, only manufacturer specs and retailer listing copy. Treat performance claims as unverified until independent testing catches up.
- Overlaps heavily with Aiper’s own Scuba S1. At similar street prices, the N1 Plus and S1 now cover the same 1,600 sq ft, both run up to 180 minutes, and both offer confirmed wall-climbing — Aiper is effectively selling two near-identical cordless robots at once.
- Stock has been inconsistent. At least one retailer (Pool Nation USA) listed the N1 Plus as out of stock at the time of this review — check current availability before assuming it ships immediately.
Aiper Scuba N1 Plus vs the alternatives
| Model | Suction | Runtime | Wall-climbing | Price |
|---|---|---|---|---|
| Aiper Scuba N1 | 80 GPM (4,800 GPH) | ~150 min | Contested across sources | $479.99-$599 |
| Aiper Scuba N1 Plus | 80 GPM (4,800 GPH) | Up to 180 min | Confirmed to 105° | $569.99-$699.99 |
| Aiper Scuba S1 | Not published (dual 3µ/180µ filtration) | Up to 180 min (~270 Eco) | Confirmed | ~$549.99-$699.99 |
| Aiper Scuba N1 Pro | 130 GPM | ~45 min scheduled cycles | Confirmed | $749.99-$1,199 |
The closest call here is the N1 Plus against the Scuba S1. Both now clean the same 1,600 sq ft footprint, run the same 180-minute standard cycle, and climb walls with a confirmed spec — the practical differences come down to filtration packaging (the S1 bundles 3-micron plus 180-micron filtration standard; the N1 Plus treats the 3-micron MicroMesh as more of an add-on option) and track record (the S1 has months more independent testing behind it, including this site’s own top cordless-pick rating). Unless the N1 Plus is genuinely cheaper at your specific retailer, the Scuba S1 remains the safer default — see the full breakdown in our Aiper Scuba lineup explained guide.
Against the cheaper Scuba N1, the Plus variant is worth the premium only if you specifically need confirmed wall-climbing or app control — if you only need floor cleaning and can find the base N1 at Costco’s lower price, the identical suction spec means you’re not losing cleaning power by going cheaper. Full breakdown in our Aiper Scuba N1 review.
Who should buy the Aiper Scuba N1 Plus
Buy it if you want the base N1’s price bracket with confirmed wall-climbing and app control, your pool is 1,600 sq ft or smaller, and you’ve found it at or below the Scuba S1’s price at your retailer. It’s a reasonable pick when those conditions line up — see our best Aiper pool cleaner guide for how it stacks against the rest of the lineup.
Skip it if the Scuba S1 costs the same or less where you’re shopping — the S1’s longer independent track record and standard dual filtration make it the lower-risk buy at a comparable price. See the full field in our best cordless robotic pool cleaner guide.
The bottom line
The Aiper Scuba N1 Plus is a real, meaningfully upgraded version of the base N1 — confirmed wall-climbing, app control, and a longer runtime are genuine improvements — but the identical 4,800 GPH suction spec and the heavy overlap with Aiper’s own better-proven Scuba S1 keep it from being an easy default recommendation. If you can find it distinctly cheaper than the S1, it’s a fair mid-tier buy. Otherwise, the S1’s track record makes it the safer choice at a similar price.